We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Testforce CanadaAnritsu MG362x1A
RF/Microwave Signal Generator
Rubidium delivers unmatched signal purity, output power, frequency stability and exceptional utility for a broad range of measurement applications across 9 kHz to 70 GHz frequency range
Signal purity determines quality of measurements in several applications such as radar, transceiver, ADC/DAC and components testing. Rubidium™ pushes the envelope in phase noise performance with its low and ultra low phase noise options. Coupled with best-in-class harmonic and spurious performance, Rubidium signal generator offers industry leading overall signal purity performance that enables customers to make more accurate measurements.
Rubidium MG362x1A offers atomic clock frequency stability with an internal rubidium frequency reference option. Alternatively, customers can also get exceptional frequency stability by calibrating an internal oven controlled crystal oscillator (OCXO) reference with an external GNSS/GPS signal. The exceptional frequency stability makes Rubidium an ideal signal generator for Metrology and high speed clock applications.
Rubidium’s AM, FM/PM, Pulse and Pulse train modulation capabilities enable generation of wide range of complex analog modulated signals. Simultaneous modulation of FM/Pulse is possible to generate complex modulation waveforms such as chirps. Wide range of signal simulation capabilities are built into the signal generators for pulsed radar testing, as well.
Rubidium features a 7 inch touch screen along with keypad and dial on the front panel. Four USB 3.0 ports on the front panel enable connecting to a variety of devices such as memory devices and Anritsu's USB power sensors. Standard drivers such as IVI.NET and IVI-C along with support of SCPI commands make remote programming of Rubidium quick and efficient.
Features
| Features | Benefit |
| Very low phase noise, close in and far out |
|
| Atomic clock frequency stability and accuracy |
|
| Onsite level and frequency calibration |
|
| Very low harmonic and spurious |
|
| Quad pulse signal generation and pulse sweep |
|
Delivering the highest purity and frequency stability levels of performance available in a RF/Microwave Signal Generator.
- Non-linear measurements
- Single tone distortion – P1dB compression point
- Two tone intermodulation – IP2, IP3
- In band and out of band interference (C/I, Blocking)
- Devices and Systems characterization
- Pulse modulated signal source to test Radar systems
- As pure CW source for LO substitution in testing of transceiver chains
- Clock and CW source for testing Gbit data converters (ADCs and DACs)
- Swept linear measurements
- As additional source/s synchronized with vector analyzer
- Frequency Reference
- Calibration and Metrology labs
SKU
Anritsu MG362x1A Family
Manufacturer
Anritsu
Model
Anritsu MG362x1A
Other Specifications/Notes
| Parameter | Specification |
|---|---|
| Frequency Range | 9 kHz to 20/43.5 GHz/70 GHz Operable up to 72 GHz |
| Frequency Resolution | 0.001 Hz |
| Phase Offset | Adjustable in 0.1 degree steps |
| SSB phase noise | -136 dBc/Hz (typ) and -140 dBc/Hz (measured) @ 10 GHz output, 10 kHz offset |
| Internal time base stability - Aging | < ±2 x 10E-8 per year with Option 3 < ±1 x 10E-9 per year with Option 56 |
| Reference frequency input/output | 10 MHz, 100 MHz and 1.6 GHz |
| Output power | -130 dBm to +20 dBm (MG36221A standard output, with Option 2) -130 dBm to +16 dBm (MG36241A, standard output, with Option 2) -90 dBm to +6 dBm (MG36271A, standard output, with Option 2) |
| Level accuracy and flatness | ± 1.4 dB (MG36221A/MG36241A) ± 2.5 dB (MG36271A) |
| Harmonics (20/43.5/70 GHz) | -58 dBc (MG36221A) -55 dBc (MG36241A and MG36271A) |
| Sub Harmonics | -83 dBc (MG36221A and MG36241A) -63 dBc (MG36271A) |
| Non-harmonics (20/43.5/70 GHz) | -63 dBc |
| Modulation | AM, FM, PM, Pulse and Pulse Train |
| Pulse modulation: min pulse width | <50 ns (unleveled) |
| Pulse modulation: Rise/Fall times | 5 ns (typical) |
| LF signal Generator waveforms | Sine, square, pulse, triangle, ramp, GN/UN noise |
| Frequency sweep modes | Step, List, Analog (MG36221A and MG36241A only) |
| Frequency sweep width | 9 kHz to full frequency range (step, list) 100 MHz to full frequency range (analog) |
| Power sweep | Step and List |
| Power sweep resolution | 0.01 dB/step |
Tools
| Model Number | Description |
|---|---|
| 01-200 | Calibrated Torque End Wrench, GPC-7 and Type N |
| 01-201 | Torque End Wrench, 5/16 in, 0.9 N.m (8 lbf·in) (for tightening male devices, for SMA, 3.5 mm, 2.4 mm, K, and V connectors) |
| 01-203 | Torque End Wrench, 13/16 in, 0.9 N.m (8 lbf·in) (for tightening ruggedized SMA, 2.4 mm, K and V test port connectors) |
| 01-204 | End Wrench, 5/16 in, Universal, Circular, Open-ended (for SMA, 3.5 mm, 2.4 mm, K, and V connectors) |
Cables and Adapters
| Model Number | Description |
|---|---|
| 1091-26-R | SMA(m) to N(m), DC to 18 GHz, 50 Ω |
| 1091-27-R | SMA(f) to N(m), DC to 18 GHz, 50 Ω |
| 1091-80-R | SMA(m) to N(f), DC to 18 GHz, 50 Ω |
| 1091-81-R | SMA(f) to N(f), DC to 18 GHz, 50 Ω |
| 34NK50 | Precision Adapter, N(m) to K(m), DC to 18 GHz, 50 Ω |
| 34NKF50 | Precision Adapter, N(m) to K(f), DC to 18 GHz, 50 Ω |
| 34NFK50 | Precision Adapter, N(f) to K(m), DC to 18 GHz, 50 Ω |
| 34NFKF50 | Precision Adapter, N(f) to K(f), DC to 18 GHz, 50 Ω |
| K220B | Precision Adapter, K(m) to K(m), DC to 40 GHz, 50 Ω |
| K222B | Precision Adapter, K(f) to K(f), DC to 40 GHz, 50 Ω |
| K224B | Precision Adapter, K(m) to K(f), DC to 40 GHz, 50 Ω |
| 33KK50C | Calibration Grade Adapter, K(m) to K(m), DC to 43.5 GHz, 50 Ω |
| 33KKF50C | Calibration Grade Adapter, K(m) to K(f), DC to 43.5 GHz, 50 Ω |
| 33KFKF50C | Calibration Grade Adapter, K(f) to K(f), DC to 43.5 GHz, 50 Ω |
| 34VFK50A | Precision Adapter, V(f) to K(m), DC to 43.5 GHz, 50 Ω |
| 34VFKF50A | Precision Adapter, V(f) to K(f), DC to 43.5 GHz, 50 Ω |
| 34VK50A | Precision Adapter, V(m) to K(m), DC to 43.5 GHz, 50 Ω |
| 34VKF50A | Precision Adapter, V(m) to K(f), DC to 43.5 GHz, 50 Ω |
Test Port Cables, Flexible, Ruggedized, Phase Stable
| Model Number | Description |
|---|---|
| N120-6 | RF Cables, Semi-Rigid, N(m) to N(m), 1 each, 0.01 to 18 GHz, 50 Ω, 15 cm (5.9 in) |
| NS120MF-6 | RF Cables, Semi-Rigid, N(f) to N(f), 1 each, 0.01 to 18 GHz, 50 Ω, 15 cm (5.9 in) |
| 15NNF50-1.0B | Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(f) to N(m), 50 Ω |
| 15NNF50-1.5B | Test Port Cable, Flexible, Phase Stable, 1.5 m (59”), DC to 18 GHz, N(f) to N(m), 50 Ω |
| 15NN50-1.0B | Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(m) to N(m), 50 Ω |
| 15LLF50-1.0A | Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, 3.5 mm(m) to 3.5 mm(f), 50 Ω |
| 15KKF50-1.0A | Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, K(m) to K(f), 50 Ω |
| 3671KFS50-60 | Test Port Cable, Flexible, Phase Stable, DC to 26.5 GHz, K(f) to 3.5 mm(m), 63.5 cm, 50 Ω |
| 3671KFK50-60 | Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 63.5 cm (25 in), 50 Ω |
| 3671KFKF50-60 | Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(f), 63.5 cm (25 in), 50 Ω |
| 3671KFK50-100 | Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 1 m (38 in), 50 Ω |
| 806-206-R | Flexible Phase Stable Cable, DC to 70 GHz, 24 in (61 cm), V(m) – V(f), 50Ω |
| 806-209-R | Flexible Phase Stable Cable, DC to 70 GHz, 36 in (91.5 cm), V(m) – V(f), 50Ω |
| 806-304-R | Flexible Phase Stable Cable, DC to 40 GHz, 36 in (91.5 cm), K(m) – K(f), 50Ω |
| 806-396-R | Flexible Low Loss Phase Stable Cable, DC to 70 GHz, 36 in (91.5 cm), V(m)-V(f), 50Ω |
Phase-Stable 18 GHz, 40 GHz, and 43.5 GHz Semi-Rigid Cables (Armored)
| Model Number | Description |
|---|---|
| 3670N50-1 | Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(f), 50 Ω |
| 3670N50-2 | Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(f), 50 Ω |
| 3670NN50-1 | Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(m), 50 Ω |
| 3670NN50-2 | Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(m), 50 Ω |
| 3670K50A-1 | Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω |
| 3670K50A-2 | Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω |
Repair and Calibration
Services and Support Programs
Anritsu’s repair and calibration programs help ensure your products continue to operate at peak performance and reliability. All repairs are covered by a 90-day repair warranty on parts replaced and services performed. Entrust us with your Anritsu test and measurement equipment for expert product support, fast service and competitive pricing.
MG362x1A Available Services
| Extended Services Program Options | 3-Year | 5-Year |
|---|---|---|
Repair Only Options |
||
| Return-to-Anritsu Repair Only | ES510 | |
Calibration Only Options |
||
| Return-to-Anritsu Standard Calibration | ES312 | ES512 |
| Return-to-Anritsu Premium Calibration | ES315 | ES515 |
Repair with Calibration Options |
||
| Return-to-Anritsu Repair and Standard Calibration | ES513 | |
| Return-to-Anritsu Repair and Premium Calibration | ES516 | |
| Read Anritsu Service Brochure here | ||
| Service Agreement Program Options | Per-incident Service |
|---|---|
| Accredited Calibration to ISO17025 and ANSI/NCSL Z540. Test report and uncertainty data included. | Option 97 |
| Standard calibration to ISO17025 and ANSI/NCSL Z540 | Option 98 |
| Premium calibration to ISO17025 and ANSI/NCSL Z540. Test report and uncertainty data included. | Option 99 |
| Read Anritsu Service Brochure here | |
Contact us for details.