Oscilloscopes + Analyzers

Swept spectrum analysis, FFT signal analysis, and a precision digitizer. Standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz/125 MHz.

Upper measurement frequency limit of 44.5 GHz, best of class carrier close-in SSB phase noise

2 MHz to 6 GHz combined with 9 kHz to 6 GHz Spectrum Analyzer, less than 6 lbs, with resistive 8.4 inch daylight touchscreen, supports wireless service providers, contractors, and installers

Rugged, dust and splash resistant, reliable, field proven, always ready. Under 2.0 kg (4.4 lbs) with battery, it’s effortless to carry while climbing a large tower, or heading through a roof hatch.

Pocket-sized headless cable and antenna analyzer that can measure LTE-U frequencies, supporting wireless operators, contractors, DAS installers, and public safety network installers and maintenance.

Site Master cable and antenna analyzer with spectrum analyzer is centered around installation, maintenance, and troubleshooting of telecommunication systems

The ergonomically designed MA2700A Handheld InterferenceHunter is equipped with a GPS receiver and antenna, an electronic compass, and a user-selectable preamplifier. It is designed to enhance Interference Mapping, which is part of option 25, Interference Analysis on Anritsu handheld instruments.

High Performance Handheld Spectrum Analyzer

PIM Master™ MW82119B Battery-operated, High Power Portable, Passive Intermodulation Analyzer with optional Cable & Antenna Analyzer

VNA Master MS2037C (5 kHz to 15 GHz) and Spectrum Analyzer (9 kHz to 15 GHz)

Guaranteed performance to 43.5 GHz with Extended K™ ports, High output power allows measurement of high attenuation devices

Wide dynamic range, high resolution, and fast sweep speeds over a wavelength range of 600 nm to 1750 nm.

2 MHz to 4 GHz combined with 9 kHz to 4 GHz Spectrum Analyzer, designed to handle the most punishing field conditions, dramatically enhances productivity

Handheld Spectrum Analyzer delivers the highest continuous frequency coverage up to 54 GHz and real-time spectrum analysis bandwidth up to 110 MHz to address current and emerging applications

Ideal for technicians and engineers engaged in field testing RF performance of NBFM, P25, TETRA, NXDN, dPMR, and LTE for commercial, public safety, maritime, and critical infrastructure radio systems